TL;DR - What are you running as a means of “antivirus” on Linux servers?
I have a few small Debian 12 servers running my services and would like to enhance my security posture. Some services are exposed to the internet and I’ve done quite a few things to protect the services and the hosts. When it comes to “antivirus”, I was looking at ClamAV as it seemed to be the most recommended. However, when I read the documentation, it stated that the recommended RAM was at least 2-4 gigs. Some of my servers have more power than other but some do not meet this requirement. The lower powered hosts are rpi3s and some Lenovo tinys.
When I searched for alternatives, I came across rkhunter and chrootkit, but they seem to no longer be maintained as their latest release was several years ago.
If possible, I’d like to run the same software across all my servers for simplicity and uniformity.
If you have a similar setup, what are you running? Any other recommendations?
P.S. if you are of the mindset that Linux doesn’t need this kind of protection then fine, that’s your belief, not mine. So please just skip this post.
The core problem with this approach is that antivirus scanning is generally based on signature recognition of malicious binaries. Behavior-based antivirus scanning mostly doesn’t work and tends to generate a lot of false positives. No freely available antivirus is going to have a signature library that is kept up to date enough to be worth the effort of running it on Linux - most vulnerabilities are going to be patched long before a free service gets around to creating a signature for malware that exploits those vulnerabilities, at which point the signature would be moot. If you want antivirus that is kept up to date on a weekly or better basis, you’re going to have to pay for a professional service.
That said, there are other, simpler (and probably more effective) options for hardening your systems:
Btw, bash has a restricted mode.
The firewall point I just don’t get. When I set up a server, for every port I either run a service and it is open, or I don’t and it is closed. That’s it. What should the firewall block?
A malware might create a service which opens a previously closed port on your system. An independently configured firewall would keep the port closed, even if the service was running without your knowledge, hopefully blocking whatever activity the malware was trying to do.
Also, you can configure the firewall to drop packets coming in to closed ports, rather than responding to the sending device that the port is closed. This effectively black-holes the incoming traffic, so it looks like there’s just nothing there.
If an attacker already has access to a system, they can use hitherto closed ports to communicate with C2 servers or attack other devices. In that case, a firewall that only allows known-good traffic will prevent further damage.
Firewalls set and enforce policy. Closed ports are only incidentally secure. Also, they can do a lot more than answer “nothing is listening here”.
You can set up an intrusion detection/prevention system, that logs/blocks certain traffic. If you do have public services running, you could block access based on location, lists of known bad actors etc. I guess you could argue that this is beyond the scope of a traditional firewall.
I don’t use a firewall apart from router, but if you set a firewall in all of your devices, the chances of one of them getting infected and spreading it to the others via LAN would be low theoretically.
A modern firewall might also block connections to known bad sites, in case you do somehow get malware reaching out to a command & control server. Or it might identify malicious application traffic over a port that should be for a more trustworthy service.
But these are usually only a concern in places like businesses or schools where there are a lot more people, devices, etc. on the network, especially if there’s a guest network.