You don’t have to rebuild the proxmox hosts to remove the cluster. I made the same mistake last year sometime and was able to remove the cluster and each of the proxmox machines works as it should standalone. I don’t recall the exact steps but it was very easy. A quick search for “proxmox remove cluster” gave me this result and from what I recall these are the steps I followed as well. https://rostislavjadavan.com/posts/promox-delete-cluster

This looks cool, and there is an itinerary plugin as well. And a community workaround to self host syncing. I’ll check it out, thanks!!

Gotcha, I’ll check that out.

Unless I can find something better I’ll just use a combination of Joplin and a spreadsheet for now, and maybe make a little self hosted solution as I figure out my own needs.

This is close to what I’m looking for, but won’t work on my iOS device while travelling. Can KDE apps live alongside a Gnome DE? I’ve never had a need to look into it.

This could work, yeah. I already use Organic maps so fits. I’ve seen a trip planning notion template, but I use self hosted Joplin so maybe I can adapt it for now.

Maybe I’ll work on an actual app myself though. I’m not super knowledgeable but could do something basic. Could be a fun project to work on in the spring.

This is ringing bells from like 2018 when I was last looking at this kind of stuff. Maybe they abandoned it or it became one of the available paid apps or something.

I feel like I’ve seen something like this as well but can’t find any reference. Lots of open source trip planner hits, but for routing a drive, not for a trip itinerary/planning.

Thanks for throwing me down a rabbit hole lol, I learned so much today. I spent a good chunk of the day researching this stuff, and found a couple of options. Came across these HP NC522SFP 10Gb NICs, someone selling 2 for under $100. My understanding is I can pair these with the generic DACs at FS.com (thanks for sharing this btw) and any 10Gb SFP switch, and I will be able to get the 10Gb link? And right, a transceiver to get the link from the ISP to the router.

I still have to do the runs for the second floor and other half of the main, but the basement is done. The whole NAS, HV, router and all that live in the basement, and the main PC will be moving there so would be easy enough to do some fiber runs there, and it’s all short. I think the longest would be 15 feet. Thanks!

Hmm that’s true. I’ve been researching used enterprise 10Gb SFP switches after one of the comments and I think that’s the way to go. And yes, in the tests I’ve ran on the ISP router, I get the full advertised speed. Can’t test above 1Gb on the other devices, but even through a VPN it averages 0.9Gb down/up.

I get it. I’ve actually only recently upgraded to the 3Gb plan because it was only another $5 per month over the 1.5Gb plan I had, so just trying to sort out next steps. Probably should have mentioned that in my post ☺️. I will definitely leave the PCs that are used for browsing/basic gaming/yt on 2.5, no need to change anything there as I doubt they will ever saturate 1Gb. After some of the posts here and more research, I definitely want the NAS and my main PC on 10Gb, and it should only cost a little more than planned. The HV uses a USB 3.0 Ethernet adapter, but I see there are some 5Gb ones available that will double the bandwidth.

Oh that’s a good point about the diagram. I just threw these together real quick to help show what I mean. Yes the ISP hardware gives me a 10Gb RJ45. I’ve been researching 10Gb networking today and I think that’s the play. How come you think a managed switch would be a pain? Just from a setup perspective?

Modem <-> switch <-> wifi router is what I was thinking to do as in my second diagram, with the wifi router handling the DHCP, but now you have me thinking if that makes sense at all.

So the 5 port switch I have does exactly what you say, but the area is also in a spot where I have easy access and can add a couple more LAN drops in a matter of minutes.

Good tip, if I add an AP I will definitely wire them together. Thanks!

I’ve got a reverse proxy set up to handle the traffic of the services I want accessible outside my network, and port 80/443 open to be able to access them.

I could definitely use the ISP router as well, and just add a 2.5/10G switch, but it is very limiting and when I first tried it, it would reset my settings every time the IP changed (anywhere from 1 week to 1 day). I definitely want the NAS, HV and my main PC on a faster connection.

This is my understanding as well, and why I prefer to get away from wifi for any device that can be wired. My neighbourhood has houses so close I could shake hands with my neighbours through a window, and they all have lots of wifi devices, so interference is inevitable.

The 3Gbps line is new to me, just upgraded from 1.5 as it was only $5 more per month, so I’m looking at how to actually utilize this now, not actively “giving up” 2Gbps 🙂. I also didn’t have any devices that could take advantage of it until some upgrades, so here we are.

The router runs Asuswrt-Merlin, but unfortunately the RT-86U doesn’t provide VLANs with Merlin, and there is no openwrt port for it.

You think it should work though with the router being placed after the switch and handling DHCP?

This is exactly my case, where it’s built into the ISP provided router. Previous model had a removable SFP and some were able to use that on their own hardware, bypassing the ISP provided gear.

Since none of my devices support 10Gb, that would get real expensive, real fast to add 5 10Gb NICs and a 10Gb switch/router. I was actually looking at the QNAP 2.5Gb switches. There are also some no-name brand unmanaged switches like Mokerlink and Nicgiga, that are well reviewed. Some have 8 x 2.5Gb and 1 or 2 x 10Gb SFP ports. I could have one of those plus a 16 port TP-Link managed switch for about $220 CAD all in, and the HV, NAS and PCs all support 2.5Gb already so no additional expense there.

Just a question of whether the way I laid it out will work or not.