I’m pretty sure you can make them set the modem/router to bridge mode and run your own router. If it’s cable, you can also buy your own non-router cable modem, then use whatever router you like behind it.
I’m pretty sure you can make them set the modem/router to bridge mode and run your own router. If it’s cable, you can also buy your own non-router cable modem, then use whatever router you like behind it.
I’ve been using option 1 for many many years. It lets me keep control of the encryption, and it’s accessible just about anywhere.
UPSes aren’t meant to keep things running for long periods of time.
If you’re trying to keep things on for hours, you need a generator. Then the UPS just needs to keep things running until the generator comes online.
I suspect it’ll be a lot cheaper to get a small generator than it would be to buy enough UPS and batteries to run things for multiple hours.
Y’all must be doing something wrong because HW raid has been hot garbage for at least 20years. I’ve been using software raid (mdadm, ZFS) since before 2000 and have never had a problem that could be attributed to the software raid itself, while I’ve had all kinds of horrible things go wrong with HW raid. And that holds true not just at home but professionally with enterprise level systems as a SysAdmin.
With the exception of the (now rare) bare metal windows server, or the most basic boot drive mirroring for VMware (with important datastores on NAS/SAN which are using software raid underneath, with at most some limited HW assisted accelerators) , hardly anyone has trusted hardware raid for decades.