Wants to be on a boat
Interesting, never had that happen to me, but then perhaps you are using a laptop with a dgpu? I have not been. My laptop generally consumes 4w at idle and up to 15w under load, so I don’t see this ever outpacing the 60w charger. The CPUs with the highest tdp are only around 100w anyway right? And in that case the laptop comes with a higher wattage charger. But you’re right I guess it could happen depending on the hardware, never personally seen it however.
I’ve run laptops before without batteries a few times and never had issues, is there a reason for the slowdown?
Remove the battery, take the motherboard out of the case. Plug the motherboard in, and voila you have a larger and more powerful raspberry pi. You could use it as a second node for control, management, observation purposes, etc.
I’ve used odoo before, it is a large piece of software and can be modified to do lots of things. Most likely you will be able to get it to do what you want. You’ll probably need the e-commerce module, there is probably some sort of mode for subscriptions. You can also add the CRM on top for marketing, etc. there is also the booking module (iirc) which is maybe useful for sessions with trainers etc. maintenance might also be useful.
Use new containers, that’s what they’re for.
Hetzner got caight MITM https traffic from their servers recently or something similar if i recall
Any demo? That doesnt have a paywall?
Seems slightly unnecessary unless you have loads lying around, I’m still using a 10 year old dual core i3 and it doesn’t sweat running 60 services, and I can expand the storage much more than a Mac mini.
I would definitely still go with containers, running baremetal is less secure, more fiddly and less reproducible
You could do all of them
Ah good point. Even more then :)
If you can find a second hand PC with a Celeron, they’re pretty low draw, and it will mean you can open it up and add as many drives as it has SATA ports. We did the same, got an old PC for £30 and added drives and more RAM.
you can keep the fan and heatsink on the board